Bedroom Lighting Lux Levels

Bedroom Lighting Lux Levels

Lighting in our living and workplaces is critically important for our ability to accomplish tasks efficiently and safely. In addition, proper light levels prevent eye strain, which allows us to work comfortably for longer periods of time. This article covers proper lighting levels and will include various lighting concepts during the conversation. If you need to brush up on the basics of lighting, check out our Properties of Light article.
bedroom lighting lux levels 1

Bedroom Lighting Lux Levels

Lighting power density is the amount of power used by lighting per unit of building area. In the United States, LPD is measured in watts per square foot. Included in the watt measurement is all power consumed by light fixtures, ballasts, controls, transformers, etc. – essentially, if the component or device is involved in lighting, it must be included in the calculation.
bedroom lighting lux levels 2

Bedroom Lighting Lux Levels

The standard for brightness is the average illuminance of the floor surface as recommended in JIS Z9110-2010 (General rules of recommended lighting levels)Paragraph 5.10, Residence; Table 17, Living room (general).
bedroom lighting lux levels 3

Bedroom Lighting Lux Levels

Partial illuminance is for task light, general illuminance is for ambient light. The standard for brightness is the average illuminance of the floor surface as recommended in JIS Z9110-2010 (General rules of recommended lighting levels)Paragraph 5.10, Residence; Table 17, Living room (general). *The Ra value (the general color rendering index) is a method for describing the effect of a light source on the color appearance of objects, compared to a reference source of the same color temperature. The closer to 100 the better the color rendering properties.
bedroom lighting lux levels 4

Bedroom Lighting Lux Levels

The standard for brightness is the average illuminance of the floor surface as recommended in JIS Z9110-2010 (General rules of recommended lighting levels)Paragraph 5.10, Residence; Table 17, Living room (general). *The Ra value (the general color rendering index) is a method for describing the effect of a light source on the color appearance of objects, compared to a reference source of the same color temperature. The closer to 100 the better the color rendering properties.
bedroom lighting lux levels 5

Bedroom Lighting Lux Levels

We need to provide enough light to allow people to accomplish see their tasks, but not so much light that it is hard to see the tasks – over lighting is just as bad as under lighting. Detailed tasks like drafting require more light, while general tasks like walking can be accomplished with less light.
bedroom lighting lux levels 6

Bedroom Lighting Lux Levels

The required light levels are indicated in a range because different tasks, even in the same space, require different amounts of light. In general, low contrast and detailed tasks require more light while high contrast and less detailed tasks require less light.
bedroom lighting lux levels 7

Bedroom Lighting Lux Levels

There are two ways to calculate the lighting power density. The first way is to use an LPD that applies to the full building based on the type of building (school, museum, office, etc.) — this method is very basic and is called the Building Area Method. The second way is to calculate the LPD based on each specific room and is called the Space-by-Space method — this method is much more accurate and may result in a lower LPD number, which is helpful when applying for utility incentives.

Leave a Reply

Your email address will not be published. Required fields are marked *